Ultrasound is a kind of mechanical wave of vibration sonicator homogenizer frequency is higher than the sound wave, can by changing the chip to vibration happens under the excitation of voltage, it has a higher frequency, shorter wavelengths, small diffraction phenomenon, especially good directivity, can become rays and directional transmission, etc.
Ultrasonic emulsification machine is the need to deal with particle suspension directly put in ultrasonic field, with high power ultrasonic to "light", is a powerful is suitable for the laboratory test and small batch dispersed liquid processing approaches.
Under normal circumstances, in order to be able to make the ultrasonic molten metal ultrasonic emulsification machine working conditions, often can make the rotor and stator are in relatively high speed motion state. The shear flat rate between tooth and tooth flat rate than the sound waves. In the system, although directly testing the difficulty of the phenomenon is necessary, but the actual result has been achieved. Ultrasonic emulsification machine it is equivalent to what ultrasonic device. High-speed movement technology accelerates a craft materials and fluid to achieve strong turbulence, thus achieve needed to achieve the purpose of in the industrial process. Because of the need to the technology of high-speed movement. Can be scattered material between rotor and stator is strong again without the shear cracks, eddy current, the leakage of the extrusion, etc., thus to decrease grain and uniform dispersion, such as the good contact between phase and phase effect. Also because of the high speed movement technology, materials processing time than the traditional way of dispersed a lot less.
Actually, ultrasonic emulsification machine using ultrasonic spray nozzle ultra strong vibration energy evenly, can effectively to ultrasonic processing of all kinds of liquid and mixed liquid, in order to achieve homogeneous, dispersion, emulsification, crushing, catalysis, etc. Generator panel has a power switch, power adjustment knobs, frequency adjustment knobs, alarm indicator light and power displayed voltmeter. Frequency adjustment knobs for boot is to adjust the resonance frequency of the dipping machine; Power control knobs allows users to choose the output power, according to need to obtain a satisfactory treatment effect. When the generator failure or improper use, user should immediately disconnect the PWM output signal and the working power supply, the alarm indicator. The main part of ultrasonic processing tank for ultrasonic transducer. This kind of transducer ultrasonic welding transducer composed of rare metal material sintering, through special processing of wound coil material to pass on the high frequency signal, to a certain magnetizing current, under the action of longitudinal stretching vibration, through the energy transfer, the vibration energy into the process tank. Ultrasonic emulsification machine power regulation by thyristor voltage regulation circuit dc voltage regulating power amplifier unit. Use detection circuit monitor the operation condition of power amplifier, once and set data does not conform to the protection circuit will work, cut off the dc voltage power amplifier unit and shut down the output of the oscillator. So that can effectively protect the ultrasonic generator power amplifier parts from being damaged.