Cheap and Durable Car Interior Fogging Tester Fogging Tester is suitable for automotive, aircraft and other interior materials, such as automotive interior plastic parts, polyurethane, textiles, leather, adhesives, non-woven fabrics, thermoplastic elastomers and other materials under high temperature. Evaluation of the evaporation of volatile components, also It can be used for the determination of high temperature fogging phenomenon of front xenon lamps. Technical Features: Wide range and temperature control device to easily realize non-standard test 6 test position design, can carry out sample test and blank test at the same time The equipment runs stably, providing users with accurate and reliable detection data Test principle and: The sample is heated in the fogging cup and begins to evaporate, and the volatilized gas condenses on the glass plate or aluminum foil that has been cooled by the cooling chamber. After the condensation process is over, remove the glass plate or aluminum foil, measure the atomization value or weight of the condensed components of the glass plate or aluminum foil, and compare it with the data before condensation, so as to obtain the atomization and volatilization characteristics of the sample. Gloss method: the gas evaporated by heating the sample in the fogging cup is condensed on the low temperature glass plate. By comparing and calculating the gloss value before and after the condensation of the glass plate, the fogging value of the sample can be obtained. (standard) Haze method: The gas evaporated by heating the sample in the fogging cup is condensed on the low temperature glass plate. By comparing and calculating the haze value of the glass plate before and after condensation, the haze value of the sample can be obtained. (sold separately) Gravimetric method: The gas evaporated by the heating of the sample in the fogging cup is condensed on the low-temperature aluminum foil. By weighing the weight change of the aluminum foil before and after condensation, the weight of the atomized-condensate of the sample can be obtained. (Standard, balance purchased separately) technical parameter: Temperature range of high temperature tank: room temperature ~ 150 ℃ (room temperature ~ 280 ℃ optional) High temperature tank temperature control accuracy: ±0.1℃ (150℃) Low temperature tank temperature range: 0～100℃ Low temperature tank temperature control accuracy: ±0.1℃ Dimensions of high temperature tank: 670mm(L)×490mm(B)×540mm(H) Dimensions of low temperature tank: 400mm(L)×220mm(B)×520mm(H) PS: (WLJCDM809-W) Qinsun Instruments Co., Ltd web: https://www.qinsun-lab.com/170.html tag: fogging,fogging tester,fogging test,fogging technique,fogging test eye,what is fogging test,trunk mat fogging tester,effect of fogging test,fogging test equipment,interior trim fogging tester,automotive interiors fogging tester,what is fogging,fogging method ,fogging optometry,fogging procedure,fogging principle,fogging test chamber,glasses fogging up with mask,ft-f1 fogging test,fogging test hindi,fogging system,fogging test hyperopia